CloudBees Security Advisory 2020-01-29
This advisory announces vulnerabilities inJenkins, CloudBees Jenkins Distribution, CloudBees Jenkins Platform and CloudBees Core.
CSRF vulnerability in Folder Plus Plugin allowed associating agents with folders
Attackers with Overall/Read, Agent/Secure, and Job/Read can associate any folder they can Job/Read with any agent they can Agent/Secure via CSRF.
The use of the crumb issuer has been enforced in some methods and the web page with the authorized agents has been restricted.
Inbound TCP Agent Protocol/3 authentication bypass
SECURITY-1682 / CVE-2020-2099
Jenkins 2.213 and earlier, LTS 2.204.1 and earlier includes support for the Inbound TCP Agent Protocol/3 for communication between master and agents. While this protocol has been deprecated in 2018 and was recently removed from Jenkins in 2.214, it could still easily be enabled in Jenkins LTS 2.204.1, 2.213, and older.
This protocol incorrectly reuses encryption parameters which allow an unauthenticated remote attacker to determine the connection secret. This secret can then be used to connect attacker-controlled Jenkins agents to the Jenkins master.
Jenkins 2.204.2 no longer allows for the use of Inbound TCP Agent Protocol/3 by default. The system property
jenkins.slaves.JnlpSlaveAgentProtocol3.ALLOW_UNSAFE can be set to
true to allow enabling the Inbound TCP Agent Protocol/3 in Jenkins 2.204.2, but doing so is strongly discouraged.
Inbound TCP Agent Protocol/3 was removed completely from Jenkins 2.214 and will not be part of Jenkins LTS after the end of the 2.204.x line.
Jenkins vulnerable to UDP amplification reflection attack
SECURITY-1641 / CVE-2020-2100
Jenkins 2.218 and earlier, LTS 2.204.1 and earlier supports two network discovery services (UDP multicast/broadcast and DNS multicast) by default.
The UDP multicast/broadcast service can be used in an amplification reflection attack, as very few bytes sent to the respective endpoint result in much larger responses: A single byte request to this service would respond with more than 100 bytes of Jenkins metadata which could be used in a DDoS attack on a Jenkins master. Within the same network, spoofed UDP packets could also be sent to make two Jenkins masters go into an infinite loop of replies to one another, thus causing a denial of service.
Jenkins 2.219, LTS 2.204.2 now disables both UDP multicast/broadcast and DNS multicast by default.
Administrators that need these features can re-enable them again by setting the system property
false (for DNS multicast) or the system property
33848 , or another port (for UDP broadcast/multicast). These are the same system properties that controlled whether these features were enabled in the past, so any instances explicitly enabling these features by setting these system properties will continue to have them enabled.
Non-constant time comparison of inbound TCP agent connection secret
SECURITY-1659 / CVE-2020-2101
Jenkins 2.218 and earlier, LTS 2.204.1 and earlier does not use a constant-time comparison validating the connection secret when an inbound TCP agent connection is initiated. This could potentially allow attackers to use statistical methods to obtain the connection secret.
Jenkins 2.219, LTS 2.204.2 now uses a constant-time comparison function for verifying connection secrets.
Non-constant time HMAC comparison
SECURITY-1660 / CVE-2020-2102
Jenkins 2.218 and earlier, LTS 2.204.1 and earlier does not use a constant-time comparison when checking whether two HMACs are equal. This could potentially allow attackers to use statistical methods to obtain a valid HMAC for an attacker-controlled input value.
Jenkins 2.219, LTS 2.204.2 now uses a constant-time comparison when validating HMACs.
Diagnostic page exposed session cookies
SECURITY-1695 / CVE-2020-2103
Jenkins shows various technical details about the current user on the
/whoAmI page. In a previous fix , the
Cookie header value containing the HTTP session ID was redacted. However, user metadata shown on this page could also include the HTTP session ID in Jenkins 2.218 and earlier, LTS 2.204.1 and earlier.
This allows attackers able to exploit a cross-site scripting vulnerability to obtain the HTTP session ID value from this page.
Jenkins 2.219, LTS 2.204.2 no longer prints out the affected user metadata that might contain the HTTP session ID.
Additionally, we also redact values of further authentication-related HTTP headers in addition to
Cookie on this page as a hardening.
Memory usage graphs accessible to anyone with Overall/Read
SECURITY-1650 / CVE-2020-2104
Jenkins includes a feature that shows a JVM memory usage chart for the Jenkins master.
Access to the chart in Jenkins 2.218 and earlier, LTS 2.204.1 and earlier requires no permissions beyond the general Overall/Read, allowing users who are not administrators to view JVM memory usage data.
Jenkins 2.219, LTS 2.204.2 now requires Overall/Administer permissions to view the JVM memory usage chart.
Jenkins REST APIs vulnerable to clickjacking
SECURITY-1704 / CVE-2020-2105
Jenkins 2.218 and earlier, LTS 2.204.1 and earlier does not serve the
X-Frame-Options: deny HTTP header on REST API responses to protect against clickjacking attacks. An attacker could exploit this by routing the victim through a specially crafted web page that embeds a REST API endpoint in an iframe and tricking the user into performing an action which would allow for the attacker to learn the content of that REST API endpoint.
Jenkins 2.219, LTS 2.204.2 now adds the
X-Frame-Options: deny HTTP header to REST API responses, which prevents these types of clickjacking attacks.
Stored XSS vulnerability in Code Coverage API Plugin
SECURITY-1680 / CVE-2020-2106
Code Coverage API Plugin 1.1.2 and earlier does not escape the filename of the coverage report used in its view.
This results in a stored cross-site scripting vulnerability that can be exploited by users able to change the job configuration.
Code Coverage API Plugin 1.1.3 escapes the filename of the coverage report used in its view.
Fortify Plugin stored credentials in plain text
SECURITY-1565 / CVE-2020-2107
Fortify Plugin 19.1.29 and earlier stored its proxy server password unencrypted in job
config.xml files. This password could be read by users with the Extended Read permission.
Fortify Plugin 19.2.30 now encrypts the proxy server password.
XXE vulnerability in WebSphere Deployer Plugin
SECURITY-1719 / CVE-2020-2108
WebSphere Deployer Plugin 1.6.1 and earlier does not configure the XML parser to prevent XML external entity (XXE) attacks. This could be exploited by a user with Job/Configure permissions to upload a specially crafted war file containing a
WEB-INF/ibm-web-ext.xml which is parsed by the plugin.
As of publication of this advisory, there is no fix.
CloudBees Traditional Platforms should be upgraded 22.214.171.124 rev3
CloudBees Cloud Platforms should be upgraded 126.96.36.199
CloudBees Jenkins Enterprise should be upgraded the Managed Masters and Operations Center to 188.8.131.52
CloudBees Jenkins Platform (rolling train, CJP Operations Center and CJP Client Master (2.x.y.z) should be upgraded to version 184.108.40.206
CloudBees Jenkins Platform (fixed train, CJP Operations Center and CJP Client Master (2.164.x.0.z) should be upgraded to version 220.127.116.11.1
CloudBees Jenkins Distribution should be upgraded to version 18.104.22.168